Feedback


RSS Master : ingénieur civil en chimie et science des matériaux, à finalité spécialisée en Advanced Materials - Innovative Recycling

There are 22 master thesis submitted for this degree.

Browse the master thesis of degree Master : ingénieur civil en chimie et science des matériaux, à finalité spécialisée en Advanced Materials - Innovative Recycling by
Master thesis submitted (Sorted by Submit Date in Descending order): 1 to 20 of 22
  TitleAuthor(s)Year(Co)Promotor(s)
Access icon Optimization of Gypsum Filtration in Phosphoric Acid ProductionVelazquez Jacobo, Sebastian2026Léonard, Angélique ULiège
Access icon Collection and reuse-recycling practices for PV panels in the Greater RegionDodaj, Fabiola2026Pirard, Eric ULiège
Access icon Application of Bacterial Bioleaching for Gold Recovery from Refractory Pyritic Flotation TailingsÇetinkaya, Hüseyin2026Gaydardzhiev, Stoyan ULiège
Access icon Development of short-cut cost correlations for CO2 capture technologies using data driven approaches: the case of the hot potassium carbonate processHisham, Zaid Bin2026Léonard, Grégoire ULiège
Access icon Photocatalytic coatings for water purification from antibiotic contaminantsDo Minh Khoi2026Heinrichs, Benoît ULiège
Access icon Synergistic visible-light photocatalysis by ZnO nanohybrids immobilized on activated halloysite for textile dyes degradationHasan, Md Nahid Bin2026Lambert, Stéphanie ULiège
Access icon Investigation of Thermal Exposure on the Structural and Optical Properties of TextilesKarakas, Büsra2026Lambert, Stéphanie ULiège
Access icon Master Thesis : On the Effectiveness of Selected Adsorbents in Reducing Odor of Recycled Polypropylene from Post-Consumer Waste and their Influence on Polymer Stabilization (including introduction to research methodology)Al-Faisal, Josef2026Toye, Dominique ULiège
Access icon Scale-up production viability of biobased flame-retardant compositesJain, Pritish2025Toye, Dominique ULiège
Access icon Study of lithium separation, concentration and precipitation during the hydrometallurgical process of black mass.Atiiga, Abdul-Wadud Ibrahim2025Gaydardzhiev, Stoyan ULiège
Access icon Contribution to the evaluation of the environmental footprint of stainless steel production: the case of APERAM BelgiumKhalid, Ehmen Bint E2025Léonard, Angélique ULiège
Access icon Contribution to the life cycle assessment of refractory through better energy consumption evaluation of involved unit operationsNoor, Ayesha2025Léonard, Angélique ULiège
Access icon Towards Recycling of NdFeB Permanent Magnets in a Circular EconomyAli, Ahsan2024Lambert, Stéphanie ULiège
Access icon Material Flow Analysis of the Recycling Pathways for Advanced (Nano)MaterialsDameska, Lora2024Léonard, Angélique ULiège
Access icon Mitigating Defects in LDPE Films: Role of Process Parameters, Contaminants, and Compatibilizers in Extrusion ProcessesPawar, Annu2024Keck-Antoine, Klaus
Access icon Validation of Sensor-Based Sorting of Plastics from Waste Electrical and Electronic Equipment and End-of-Life VehiclesUhlig, Jakob2024Pirard, Eric ULiège; Mucsi, Gabor
Access icon Master thesis : Development of porous solid ceramic electrolyte scaffold for sodium ion batteriesRoni, Md Rafiul Alam2024Job, Nathalie ULiège
Access icon Development of Antibacterial Functionalized Textiles with ZnOGonzalez Vargas, Cristina2024Lambert, Stéphanie ULiège
Access icon Selective recovery of graphite from the hydrometallurgical processing of Lithium Ion BatteriesJha, Smriti Anand2023Gaydardzhiev, Stoyan ULiège
Access icon Validation of Single-Drop Cell by the study of Mass Transfer Kinetics for n-Butyl Acetate, Water and AcetoneGomez Lozano, Cristian David2023Pfennig, Andreas ULiège
Master thesis submitted (Sorted by Submit Date in Descending order): 1 to 20 of 22


Access

10
6
6

Years defense

8
4
6
4

Disciplines

11
9
3
2
1
View more

Promotors departments

16
5
1
1
1

Promotors

4
4
3
2
2
View more

Degrees

22

Faculties

22

Languages

22