Structural Strength Improvement of Distortion Grids via Topology Optimization Cenaero
Dinu, Carmen-Alexandra
Promotor(s) :
Salles, Loïc
Date of defense : 7-Sep-2026/8-Sep-2026 • Permalink : http://hdl.handle.net/2268.2/26591
Details
| Title : | Structural Strength Improvement of Distortion Grids via Topology Optimization Cenaero |
| Author : | Dinu, Carmen-Alexandra
|
| Date of defense : | 7-Sep-2026/8-Sep-2026 |
| Advisor(s) : | Salles, Loïc
|
| Committee's member(s) : | Hillewaert, Koen
Nyssen , Florence |
| Language : | English |
| Number of pages : | 102 |
| Keywords : | [en] Topology optimization, distortion generators, swirl patterns, mechanical performances, eigenfrequencies maximization. |
| Discipline(s) : | Engineering, computing & technology > Aerospace & aeronautics engineering |
| Institution(s) : | Université de Liège, Liège, Belgique |
| Degree: | Master en ingénieur civil en aérospatiale, à finalité spécialisée en "aerospace engineering" |
| Faculty: | Master thesis of the Faculté des Sciences appliquées |
Abstract
[en] The implementation of new technologies in aircraft engines such as Boundary Layer Ingestion (BLI), Ultra-High Bypass Ratio (UHBR) engines, unducted architectures has introduced the need for advanced distortion generators that are capable to reproduce complex non-uniform swirl patterns. In addition to the aerodynamic performances, the mechanical behavior of the structure must be taken into account to ensure that the structure can withstand the loads during operation while maintaining its structural integrity. In this context, this thesis addresses the topology optimization application to a distortion grid system with the aim of improving the structural performance while allowing a reduced amount of material to be added.
A simplified test case is chosen in order to retain the main characteristics of the industry application and the workflow is tested on both 2D and 3D cases. A numerical workflow based on the maximization of the first three eigenfrequencies and a volume constraint is developed and applied on a representative blade. This baseline formulation is extended and stress constraints are added progressively based on a Computational Fluid Dynamics simulation and the geometries obtained for different optimization configurations are compared. The results show that the proposed optimization workflow generates several connecting supports for the blade structure, while respecting the imposed volume constraint. In both 2D and 3D cases, similarities are observed between the obtained results, suggesting that the eigenfrequencies and volume formulation provides an efficient design, while the stress constraint is mainly affecting the local material distribution rather than governing the overall topology. The proposed workflow is applied on the industrial case to demonstrate the applicability of the proposed method to a more complex geometry.
Overall, this study demonstrates that this topology optimization formulation provides a basis for exploring structurally efficient configurations, while more detailed aerodynamic, aeroelastic and structural analysis are needed in order to validate the final design.
Cite this master thesis
The University of Liège does not guarantee the scientific quality of these students' works or the accuracy of all the information they contain.

Master Thesis Online


s2402245.pdf