Feedback

Browse the master thesis of degree Master en ingénieur civil en aérospatiale, à finalité spécialisée en "aerospace engineering" by
Master thesis submitted (Sorted by Submit Date in Descending order): 1 to 20 of 321
  TitleAuthor(s)Year(Co)Promotor(s)
Access icon Microstructural Characterization and Mechanical Properties of Inconel 718 Produced by LPBF Using Optimized Processing Parameters Département A&M : Service Métallurgie et Sciences des Matériaux (Université de Liège)Ouchem, Yassine2026Tchuindjang, Jérôme Tchoufack ULiège; Mertens, Anne ULiège
Access icon Four-bar linkage hold down and release mechanical optimisation for the Athena X-IFU door entrance assembly Centre Spatial de LiègeJandrain, Héloïse2026Jacques, Lionel ULiège
Access icon Integration of axial velocity-density ratio effects in DNS of a high-speed low-pressure turbine Département A&M (Université de Liège)Schmitz, Noam2026Hillewaert, Koen ULiège
Access icon Analytical modelling and preliminary design of a small-scale experimental whirl flutter demonstrator Wind tunnel laboratory (Université de Liège)Di Puma, Léo2026Salles, Loïc ULiège
Access icon Development of CFD Simulations of Supersonic Jet Impingement on a Liquid Surface in the Electric Arc Furnace Département A&M (Université de Liège)Mattson, Tyler2026Terrapon, Vincent ULiège
Access icon Investigation of a fast, robust method for flutter prediction of a transonic compressor at off-design The von Karman Institute for Fluid DynamicsJewasinski, Claire2026Salles, Loïc ULiège
Access icon Control-aided construction of basins of attraction of nonlinear dynamical systems Département A&M : Vibrations non-linéaires (Université de Liège)Benlachhab, Reda2026Raze, Ghislain ULiège
Access icon Thruster-based ADCS Momentum Management for Deep-Space CubeSats Arcsec SpaceLambelin, Alexandre2026Collette, Christophe ULiège
Access icon Ground-based debris detection during daytime Arcsec SpaceKellens, Lola2026Habraken, Serge ULiège
Access icon Thermo-mechanical topology optimization of detector support: application to the VIGIL JEDI instrument Centre Spatial de LiègeHeine, Clément2026Jacques, Lionel ULiège
Access icon Improvement and Validation of an SUV Model for Crash Simulations in LS-DYNA GDTechDenoël, Elioth2026Duysinx, Pierre ULiège
Access icon Influence of Bolt Pretension on the Analytical Design of an Aeronautical Bolt under Shear LoadingDelrée, Clément2026Boman, Romain ULiège
Access icon The porpoising effect : wind tunnel testing and reduced-order-modelling. Université de LiègeUcci, Thomas2026Andrianne, Thomas ULiège
Access icon Life Cycle Assessment of the Copernicus CO2M Flight Calibration Unit developed at the Centre Spatial de Liège Centre Spatial de LiègeDupuis, Lucas2026Jacques, Lionel ULiège; Léonard, Angélique ULiège
Access icon Numerical and Experimental Analysis of a NACA Shaped Fuselage of a Civil Aircraf Université de LiègeVan Hoye, Antoine2026Andrianne, Thomas ULiège
Access icon Drag acting on articulated cylinders in pedalling motion : An experimental study towards data-driven modelling Département A&M (Université de Liège)Pliez, Nathan2026Andrianne, Thomas ULiège
Access icon Solar Array Deployment Mechanism: Study and Redesign of a Space-Grade Hinge AerospacelabPaquet, Antoine2026Bruls, Olivier ULiège
Access icon Isogeometric Analysis for Shell Structures: Capabilities, Limitations and Industrial Applications for Numerical Simulations with LS-DYNA Software GDTechVanhaverbeke, Irina2026Boman, Romain ULiège
Access icon Optical and Mechanical Design of a Phase-Induced Amplitude Apodizer for Efficient Fiber Coupling in Optical Communication Ground Stations AMOS SAToussaint, Lily2026Habraken, Serge ULiège
Access icon Modelling a High Precision Fibre Optic Gyroscope for Low-frequency Active Seismic Isolation Université de LiègeSánchez Soler, Alejandro2026Collette, Christophe ULiège
Master thesis submitted (Sorted by Submit Date in Descending order): 1 to 20 of 321


158
101
62
37
48
42
32
32
295
22
8
6
4
282
12
10
7
7
44
39
35
22
21
321
321
320
1